100W Stereo FM Bluetooth Receiver Amplifier

A stylish 2 x 100W (into 4Ω) FM stereo receiver with bluetooth audio streaming and a remote control. It features four stereo RCA inputs for CD, DVD, TV and Auxiliary. The large rotary dial controls volume, balance, bass and treble. The digital display tuner has precision push-button tuning and 30 memory presets for the FM radio band. FM tuner also offers RDS information. A-B speaker switch allows the amplifier to power two separate sets of stereo speakers in series - A or B or A+B. Pre-out function continues to operate when unit is in stand-by mode. For use in commercial PA systems, when turned on the receiver will resume at the same volume level and input selection as when it was last powered off.

Features

• 2 x 100W RMS output power @ 4 Ohm
• FM Stereo tuner
• Bluetooth 5.0 Wireless input
• 30 FM station presets
• Volume level & input selection memory
• 4 stereo RCA inputs
• Tape input/output
• A-B speaker switch
• Remote control

Specifications

• Input Specifications:
• Line Level Inputs (TV audio, tape, DVD, CD, aux etc.)
• Input Impedance: 47kΩ
• Input Sensitivity: 390mV (Line in, TV, DVD/CD, AUX)
• Line Level Output:
• Output Impedance: Line out: 47kΩ
• Maximum Output Level: Line out: 360mV
• Amplifier Specifications:
• Treble: ±14dB @ 10kHz (+0, -3dB)
• Bass: ±14dB @ 100Hz (+0, -3dB)
• Power Output: 2 x 100W RMS @ 4Ω
• Frequency Response: 10Hz to 25kHz (-3dB points)
• Distortion: Less than 0.5% @ 1W
• Signal to Noise Ratio (A Weighted): >80dB
• Channel Separation: >52dB
• Voltage / Power Consumption: Max. 450W
• Dimensions: 430W x 283D x 92Hmm (with feet)
• Tuner Specifications:
• Frequency Range: 87.5 - 108MHz 0.05MHz step
• Antenna Terminal: 75Ω (unbalanced)
• Preset Stations: 30
• Bluetooth Specifications:
• Bluetooth: 5.0
• Bluetooth Profile: A2DP, AVRCP
• Audio Coding: SBC
• Bluetooth Range: 10m (Line of sight)